|
|
Model 374
| Summary |
Lever style polypropylene pump for dispensing lubricants, alcohol, and fuel oils from 15-55 gallon drums. |
|
|
|
|
|
|
|
|
Model 375
| Summary |
Lever style polypropylene pump for dispensing water based fluids, chemicals, and acids from 15-55 gallon drums. |
|
|
|
|
|
|
Model 376
| Summary |
Lever style ryton pump for dispensing strong acids and alkali solutions from 15-55 gallon drums. |
|
|
|
|
|
|
Model 377
| Summary |
Lever style ryton pump for dispensing strong acids, alkali solutions, and nitric acid from 15-55 gallon drums. Viton and Teflon seals. |
|
|
|
|
|
|
Model 360
| Summary |
Polypropylene Pump w/o hose - fits 15 through 55-gallon drums with 2" bung opening. Constructed of polypropylene and nickel plated steel. Can be used with weak acids, anti-freeze, some mild chemicals and detergents. Includes bung adapter and discharge spout. Spout can be removed and special hose attached. Dispenses approximately 8 oz. per stroke. |
|
|
|
|
|
|
Model 362
| Summary |
Nylon Pump w/o hose - fits 5 to 6 gallon pails with 2 1/8" max opening outside diameter. Constructed of nylon and nickel plated steel. Can be used with mild thinners and solvents. Includes special plastic bung adapter and discharge spout. Spout can be removed and special hose attached. Dispenses approximately 8 oz. per stroke. |
|
|
|
|
|
|
Model 363
| Summary |
Nylon Pump w/o hose - fits 15 through 55-gallon drums with 2" bung opening. Constructed of nylon and nickel plated steel. Can be used with paint thinners and general solvents. Includes bung adapter and discharge spout. Spout can be removed and special hose attached. Dispenses approximately 8 oz. per stroke. |
|
|
|
|
|
|
Model 365
| Summary |
Nylon Pump w/o hose - fits 15 through 55-gallon drums with 2" bung opening. Constructed of nylon, stainless steel, and special packing. Can be used with some stronger chemicals and solvents, such as lacquer thinner. Also suitable for edible products such as cooking oils. Includes bung adapter and discharge spout. Spout can be removed and special hose attached. Dispenses approximately 8 oz. per stroke. |
|
|
|
|
|
|
Model 369
| Summary |
Polyethylene Pump - fits 55-gallon drums with 2" bung opening. Constructed of polyethylene and PVC. Can be used with mild acids, light oils, water based fluids and other materials which are Not corrosive to polyethylene and PVC. (Do Not use with lacquer thinners.) Dispensing rate of 1 pint per 5 strokes. Siphons to a lower level or pumps to higher level. Siphoning is controlled by air vent on top. |
|
|
|
|
|
|
Model 1014
| Summary |
Plastic Rotary Pump
For dispensing petroleum products, Water-based chemicals, and chlorinated Solvents. Polypropylene construction with Teflon seals. |
|
|
|
|
|
|